[memcached] - Repcached 설치하기 .

Category: Memcached | January 12, 2015

repcached 설치

1. repcached 란?

한 대로는 불안한 memcached를 이중화 한 시스템

2. 설치 시작!

알아서 최신버전으로 다운받자.

  • 필요 패키지 설치 (ubuntu)
$ sudo apt-get install libevent-dev g++ make
  • 압축풀고 대충~ make , install
$ tar xvzf ...tar.gz   
$ ./configure --enable-replication   
$ make   
$ make install   
  • replication 할 설정 파일 만들기
sudo vim /etc/memcachedrep
## extra commandline options to start memcached in replicated mode
# -x < ip_addr > hostname or IP address of the master replication server
# -X < num > TCP port number of the master (default: 11212)
 DAEMON_ARGS="-m 64 -p 11211 -u root -P /var/run/memcachedrep.pid -d -x 10.10.20.11"

  • 실행파일 스크립트.
sudo vim /etc/init.d/memcahedrep
#!/bin.sh
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="memcachedrep"
NAME=memcached
DAEMON=/usr/local/bin/$NAME
DAEMON_ARGS="--options args"
PIDFILE=/var/run/memcachedrep.pid
SCRIPTNAME=/etc/init.d/$DESC
VERBOSE="yes"
# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0
# Read configuration variable file if it is present
[ -r /etc/$DESC ] && . /etc/$DESC
# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh
# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions
#
# Function that starts the daemon/service
#
do_start()
{
    # Return
    #   0 if daemon has been started
    #   1 if daemon was already running
    #   2 if daemon could not be started
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null 
        || return 1
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- 
        $DAEMON_ARGS 
        || return 2
    # Add code here, if necessary, that waits for the process to be ready
    # to handle requests from services started subsequently which depend
    # on this one.  As a last resort, sleep for some time.
}
#
# Function that stops the daemon/service
#
do_stop()
{
    # Return
    #   0 if daemon has been stopped
    #   1 if daemon was already stopped
    #   2 if daemon could not be stopped
    #   other if a failure occurred
    start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
    RETVAL="$?"
    [ "$RETVAL" = 2 ] && return 2
    # Wait for children to finish too if this is a daemon that forks
    # and if the daemon is only ever run from this initscript.
    # If the above conditions are not satisfied then add some other code
    # that waits for the process to drop all resources that could be
    # needed by services started subsequently.  A last resort is to
    # sleep for some time.
    start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
    [ "$?" = 2 ] && return 2
    # Many daemons don't delete their pidfiles when they exit.
    rm -f $PIDFILE
    return "$RETVAL"
}
#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
    #
    # If the daemon can reload its configuration without
    # restarting (for example, when it is sent a SIGHUP),
    # then implement that here.
    #
    start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
    return 0
}
case "$1" in
  start)
    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
    do_start
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
  stop)
    [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
    do_stop
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
  #reload|force-reload)
    #
    # If do_reload() is not implemented then leave this commented out
    # and leave 'force-reload' as an alias for 'restart'.
    #
    #log_daemon_msg "Reloading $DESC" "$NAME"
    #do_reload
    #log_end_msg $?
    #;;
  restart|force-reload)
    #
    # If the "reload" option is implemented then remove the
    # 'force-reload' alias
    #
    log_daemon_msg "Restarting $DESC" "$NAME"
    do_stop
    case "$?" in
      0|1)
        do_start
        case "$?" in
            0) log_end_msg 0 ;;
            1) log_end_msg 1 ;; # Old process is still running
            *) log_end_msg 1 ;; # Failed to start
        esac
        ;;
      *)
        # Failed to stop
        log_end_msg 1
        ;;
    esac
    ;;
  *)
    #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
    echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
    exit 3
    ;;
esac
:
  • 실행권한 및 서비스 등록하기
$sudo chmod a+x /etc/init.d/memcachedrep
$ sudo update rc-d memcachedrep defaults